Phone：0371-67195218 67195556 13503821638

Sand Machine:
Product use: Vertical impact break (also called sand making machine): This product is widely used in a variety of ores, cement, refractories, aluminum where the soil grog, carborundum, glass raw materials, mechanisms for building sand, stone and a variety of metallurgical slag, especially for silicon carbide, carborundum, sintered bauxite, the U.S. high sand hard, special hard and corrosion-resistant than other types of materials, production of the effectiveness of the breakers more. Operating principle： Material from the machine into the upper part of the vertical high-speed rotation of the impeller at high speed under the influence of centrifugal force, and another part in the form of streaming umbrella of materials produced in the impeller around the high-speed impact with the crush, the material impact on each other, then they will in the impeller and the material between the chassis in order to form a vortex several times each impact, friction and grinding, direct discharges from the bottom to form a closed loop on many occasions by the screening device control to achieve the required finished size.     Technical Parameters：   Type feed size power rotor velocity capacity Dimension Weight (mm) (kw) (r/min) (t/h) (m) (t) PL-600 35 22-55 2000/3000 12/30 2.5×Ф1.6×2.26 5.6 PL-750 45 45-90 1500/2500 25-55 2.78×Ф1.8×2.7 7.3 PL-900 50 90-180 1200/2000 55-100 3.9×Ф2.16×2.77 12.1 PL-1050 60 150-264 1000/1700 100-160 4.66×Ф2.45×3.66 16.9 PL-1250 60 264-440 850/1450 160-300 5.6×Ф2.95×4 22 PL-1350 60 320-440 800/1193 200-360 5.34×Ф2.94×3.65 26 Feature: (1) The simple structure is reasonable, running cost is low. (2) broken rate, energy-saving. With a crushing, coarse grinding function. (3) more suitable for crushing medium hard, special hard material. (4) The moisture content of materials subject to little impact on moisture content of up to about 8%. (5) products into a cube, stacking density, small iron contamination. (6) The impeller from the lining wear is small, easy maintenance. (7) Work noise below 75 decibels (db level), the dust less pollution. product price: Price by the company establish a national uniform price, please call Yee Product Service: The company offers pre-market information consultation. To help customers understand the product-related information, to choose their own models, the right product price, sales in the help link transportation and other services. High-quality after-sale tracking service, resolve customer experience in production practical problems.
Sand Washer:       Sand Washer Product Use: Sand washing machine is used with the sand making a sand washed-style system of essential equipment, which can be a mixture of sand making the system the small amount of powder and the sand wash away impurities, thereby enhancing the quality of sand. Sand washing machine is a kind of bucket-wheel-washing equipment, mainly related to machinery and stone. Mainly used in construction sites, gravel plants, concrete hydropower dam site, glass quartz sand and oil sand filling by pressure washing, grading and dehydration.It has many excellent sides, such as washing clearly, frame in reason, small consumption of power, small loss through washing sand. Especially because of the separation between the transmission of the water and the sand, so the rate of the fault is lower than other common sand washing macine. Advantage: · Simple structure. · Easy to maintain. · Water saving. · Durability. · No pollution.     technical parameters: Type bucket wheel diameter capacity power click weight   (mm) (t/h) (kw) (t) XS2600 I 2600 20-80 5.5 2.4 XS2600 II 2600 30-90 7.5 2.9 XS3200 3200 240-300 11 11.4 XS3600 3600 280-400 15 16.7   Feature: Reasonable structure, convenient maintenance, handling a large quantity and power consumption is small, clean.lowsand lost.   Price: Price by the company establish a national uniform price, please call discussion. Service: The company offers pre-market information consultation. To help customers understand the product-related information, to choose their own models, the right product price. Sold the help link transportation and other services. High-quality after-sale tracking service, resolve customer experience in production practical problems.

 

Fine crusher：     Introduction: Efficient crushing machine, crusher with reference to all types of works and in accordance with the specific use of user feedback, combined with the advantages of the design of new efficient Sand (crushing equipment). Adapt to these artificial machine-made sand industry is grinding rod-type sand making machine, impact-type sand making machine, sand making straight-through alternative. The machines produce products are: a material particle size is small, grain-type uniform, large capacity, long life hammer (4 million tons), and the supporting power of a small, variable three broken for two broken, process simplification, simple structure, easy maintenance, smooth operation and so on. Investment in equipment than the traditional craft of similar size and equipment 35% -50%, output efficiency is higher than the traditional craft of similar size and equipment 35% -50% (in limestone, for example: one product particle size ≤ 5mm 85% above). Long-run maintenance costs than the traditional craft of similar size and equipment 35% -50%, is widely used in industry, machine-made sand, cement, refractory and metallurgical and other industries. For raw materials: slate. Quartz stone. Shales. Marble. Orthoclase. Plagioclase. Dolomites. Limestone. Talc raw materials such as broken Finished Sample     technical parameter       Type (mm) feed size (mm) maximum feed size(mm) discharging size (mm) Discharging Adjustment width(mm) capacity (t/h) 800×400 400×185 120 ＜5 5-20mm 20-45 800×600 500×250 180 ＜5 5-20mm 35-55 800×800 550×330 180 ＜5 5-20mm 35-65 1010×1010 1000×350 180 ＜5 5-20mm 45-75 1200×1000 1200×400 180 ＜5 5-20mm 80-110 1200×1200 1200×450 180 ＜5 5-20mm 90-130 1400×1400 1500×500 180 ＜5 5-20mm 100-160 1600×1600 1600×550 180 ＜5 5-20mm 170-250 1800×1800 1800×800 200 ＜5 5-20mm 250-315       Impact Crusher:     Product Use: This product series is optimized after adopting domestic and foreign technique.It can process granite, basalt, limestone, etc. which the granularity is not bigger than 120-300 (mm) and crushing compression strength is not more than 320mp. It features high crushing scale, high crushing efficiency, and it is convenient for maintenance. This cubeshaped fineness product is the first-class device used in high grade road surface, ailway, water conservancy and eledtrictiy industry. Impact Crusher Operating principle: It is a kind of crushing equipment, using impact energy to crush materials. When materials get into the area where the board hammer plays a part, under the impact function of board hammer at a high speed, the crushed ones are thrown to the impact device above the rotor continuously. And then they are rebounded from the impact liner to the area where the board hammer plays a part, and are impacted again. The materials from large ones to small ones get into the impact cavity for being crushed repeatedly. The process is going on until the materials are crushed to the required sizes and discharged from down of the machine.   Click Crusher View Type capacity feed size maximum feed size discharge size power (t/h) (mm) (mm) (mm) (kw) PF-500×400 4-8 430×300 100 0-20 7.5 PF-1000×700 15-30 670×400 200 0-30 37 PF-1000×1000 30-60 970×400 200 0-30 55 PF-1250×1000 40-100 1020×538 250 0-50 90 Another variety of models Crusher: PF-0607 PF-0807 PF-1010 PF-1007 PF-1210 PF-1214 PF-1013 PF-1315 etc Details of layout parameters is limited For more information please contact the company             Vibrating feeder Vibrating feeder are a variety of controls available for the different types of vibratory feeders. Pneumatic feeder controls include a quick-acting valve, an air line filter, a pressure regulator gauge, a lubricator and a long air hose. A transformer-type device, available for electromagnetic vibratory feeders, adjusts the intensity of vibration by varying the applied voltage. Electromechanical feeders have a wall-mounted control box with an on/off button or switch and overload protection. Special controls for remote operation include two speed, maximum-to-minimum material flow controls for batch weighing and panel board controls for multiple feeder installation. An accelerometer can be attached to the drive unit to monitor the amplitude and to apply a correction to the feeder, which tends to vibrate more quickly as the material level drops. Vibratory feeders are utilized in the pharmaceutical, automotive, chemical and mining industries. Other industries include steel, glass, foundry, concrete, recycling, bakery, railroad unloading and plastics. Chemical plants typically use vibratory feeders to control the flow of ingredients to the mixing tanks. Foundries use them to add binders and carbons to sand reprocessing systems. The pulp and paper industry uses vibratory feeders for chemical additive feeding in the bleaching process, while the metal working industry uses them for feeding metal parts to beat treating furnaces. Vibratory feeders also are used by water and sewage treatment plants in chemical additive handling. Other materials that are separated by vibratory feeders include powder, plastic pellets, dry chemicals, coal, metals, ore, minerals, aluminum, mining and aggregates, grains, seed, dry detergents, ceramics, textiles, rubber, fibers, wood chips, salt, sugar and many, many more. Feature: 1) flexible design 2) extra heavy-duty construction 3) exclusive vibrator technology 4) ease-of field-changes in grizzly opening and deck-slope   Type size of funnel max feed size capacity power weght installation slop Overall Dimension (mm) (MM) (t/h) (kw) (t) (o) (mm) GZD850*3000 850*3000 120 400 7.5 3.6 5 3110*1800*1600 GZD960*3800 960*3800 150 500 11 4.5 5 3850*1950*1630 GZD1100*4200 1100*4200 240 580 15 5.5 5 4400*2050*1660 GZD1100*4900 1100*4900 280 580 15 6 5 5200*2050*7700 GZD13100*4900 1300*4900 450 650 22 7 5 5200*2350*1750 vibrating screen   Vibrating screen Vibrating Screen is a system of sand production line, one of the essential equipment. The vibrating screen as the circle movement, sub-materials for the quarry stone design, but also for the mineral separation, building materials, chemical products and other departments to use classification. This machine has the advanced structure, strong excitation, the vibration noise is small, rugged and durable and so on.   Type screen cloth sieve poresize feed size capacity power weight layer (MM) (MM) (T/H) (KW) (KG) 2YK1235 2 5-120 ≤400 60-210 5.5 3600 3YK1545 3 5-150 ≤400 110-385 15 6800 2YK1854 2 5-200 ≤400 200-450 18.5 8600 3YK1854 3 5-200 ≤400 200-500 22 9200       Sand and gravel production line flow chart Machine-made sand production line complete sets of equipment Machine-made sand production line is a feeder , jaw crusher, sand making machine, linear vibrating screens and high-sand washing machine for major equipment.   Sand and gravel production line complete sets of equipment Sand production line, mainly by the jaw crusher, impact crusher, sand making machine, vibrating screen and other auxiliary equipment, composition, high efficiency, stability, low power and low wear and other excellent performance characteristics   Stone Production Line: Weprovide complete technical support for customers. The whole production line consists of vibrating feeder, jaw crusher, impact crusher, vibrating screen, belt conveyor, electric control, etc. We design different production lines ranging 50 t/h to 500 t/h by combining different models of equipments also matching cone crusher, deduster, etc if necessary to satisfy different customers technological requirements. It is widely used for crushing hard limestone, granite, basalt, gravel, metallurgic slag, etc or artificial sand making for hydroelectric power, building material, high way, city construction, etc. Different models of equipments are combined to meet different customers' different demands according to different craft requirements.                   Phone：0371-67195218 67195556 13503821638

1-2-3-4-5-6-7 Back to homepage