Non-autoclaved aerated block device |
Light brick production process |
Heat insulation brick equipment |
| |
|
|
 `
|
 |
 |
Non-autoclaved aerated lightweight blocks of brick production process
It was to meet the wall of innovation and building energy-saving policy to change the autoclaved aerated block complex process, the traditional large investment trend of marketing and the for medium and small investors start filling block brick into the green building materials industry, putting in a lot of manpower, and material resources, through research and staff have been Efforts to develop a kind of thermal insulation. Light earthquake. Energy-saving environmental protection. Limin or discarded materials, new energy-saving wall production processes
Brick Features:
1.The proportion of this kind of brick(also known as light brick) is less than the proportion of water ,so it can float on water. This fearture contribute to ?reduce building weight, greatly reduce labor intensity and increase the construction efficiency. As the weight of small building compared to other construction materials to improve the earthquake resistance level. As its lighter construction weight than other building materials,this improve the earthquake resistance level.
2. Its low thermal conductivity, good thermal insulation effect could significantly reduces air conditioning energy consumption of buildings.So this building materials -- light brick is a preferred wall material.
3. Autoclaved aerated block of porous structure so that it has a good sound-absorbing. properties of the wall
completely to achieve splitting noise requirements
4.Its strength is same as autoclaved aerated blocks. It has the fearture of no coarse aggregate so it can be sawed, planed, drilled, nailed in any needed processing,also easy decoration.
Non-autoclaved aerated block has a variety sizes to meet the needs of a variety of masonry.
Technical advantages:
1. broad and low cost raw material sources
2. With high technological content.
3. simple process, easy operation.
4. Need no-high demanding production conditions.
5. Investment based on individual condition.Production flexibility.
6. Technology used widely.
|
Multifunctional pad molding machine |
|
|
|
Introduction:
Multifunctional pad is molding machine is hydraulic pressure, combined with the vibration of the cement baking-free brick machine. It with sand, stone, slag, shale, gangue, coal ash, etc for main raw material, combined with a little cement, the pressure molding then through natural maintenance can dive into the sales use.
Automatic multi-function concrete pad is machine, with hydraulic and vibration of combining the design structure, mould adopts the high quality steel products with mature technology, advanced technology; The strict production process; This machine also adopts two fabrics device. The machine performance is stable, durable, are in a leading position. Bedding block machine not only can produce various specifications pad is, wall brick, also can produce the colored pavement brick, road-edge stone, ShuKeng stone, lawn brick, slope protection brick multiple products. Products beautiful, good intensity, can the mold of palletizing, save a lot of manpower. Because pad is machine superior performance, good investment ratio, deep user high praise, for building industry preferred. Superior performance, deep user high praise, good performance, high yield, employing less, comprehensive cost is low; Simple structure, operation, easy maintenance, low malfunction. On the market has been achieved good economic benefit and social benefit, is the production of bedding block an ideal equipment.
USES:
Mainly for the production of all kinds of different concrete spacers, reinforced support, and of reinforced concrete guard-layer spacers, beam support, and reinforced floor spacing standard pad is mainly used for supporting and so on building the site, highway, railway, Bridges and buildings.
|
QTJ4-25 Block Making Machine |
|
 |
Equipment performance:
It has the feartures of reasonable design, compact structure, directional vibration, frequency brakes, and the immediate abolition of energy consumption, without the need of artificial fabric to the board. This greatly reducing the labor intensity. Its up and down pressure, and powerful vibrator is particularly suitable for high-strength block the production, post-forming stacking (3-5 layers high). This is a kind of multi-purpose machine with different molds be produced. The block’s are high density, high strength and its performance is comparable with large type equipment.
Technical parameters:
production capacity: 30000 piece
power: 21kw
Forming cycle: 25s
Pallet Size: 850 * 450 * 40
Overall dimensions: 3000 * 1950 * 2400 (mm)
Executive Standard: GB/T8533-1998
|
Hydraulic Block-making Machine |
|
|
 |
|
Hydraulic Block-making Machine
The Machine Description:
1 Automatic Hydraulic Block Machine use sand. stone. ash. cinder. gangue. tailings. ceramsite. perlite and other industrial waste to process variety of new wall materials, materials widely, green economy, less investment, effective fast.
2.Concealed hydraulic oil circuit reduce space that the machine takes up. Shorten the pipeline make it more powerful. The unique cooling system can ensure the oil temperature under any work circumstances and completely solved the problem of long-run leakage oil. Every parts of the machine have the characterist of reliable quality and stable performance. 3.Its control system is main control system and computer control system. Frequency and speed changing device: It can change the action based on the different material with a high degree flexibility. 4.It has a unique structure of crank rod feeding device and completely solve the problem of discharge in shaped brick. 5.Machine with high accuracy. High-strength castings and special welding techniques and materials, rigidity is good, earthquake-resistant, long life.
6.Mold: We increase the thickness of the mold using fine grinding, special steel, high-frequency carburizing treatment with more sustainable use. This machine can replace different mold and produce standard bricks, lawns brick, pavers, revetment tiles, road teeth brick, hollow bricks blind hole bricks and other specificate bricks. It is multifunctional, flexible and proactive. It meets the requirements of of users cartridge design and can replace the mold within a few minutes to facilitate the operation greatly improved efficiency.
7.Vibration: This machine uses sets mode resonance, with a strong exciting force, the production of the block strength is high.
8.Molding: Its molding cycle is short. The block products is high strength, accuracy dimension. The machine's unique design of balance mold produce block shape formation, angular pretty neat.
This machine features:
The block forming cycle is short and production efficiency is high. It is high strength, dense, dimensional precision. This machine can produce different specifications bricks, hollow blocks, curb stone, as well as tree planting grass brick, slope protection brick and other cement products through the replacement of mold.
Note:
Special-shaped brick mold requires the user to confirm or to provide drawings produced.
Solar Steam Curing Process |
 |
|
Description:
Solar brick steam curing process is researched and developed by ZHENG ZHOU MINGXING MACHINERY MANUFACTURE.CO.LTD without changing the original brick-making equipment, preparation.It is based on the brick-making process to change the finalpart of the conservation to simulate the natural process of nature conservation. The use of low-pressure steam curing shorten the curing time for customers to increase time effect. Saving space and ?harden cost provides customers with high cost-effective.
Features:
It can be supported with a variety of large-scale production base. It can shorten the curing time and enhance the density of bricks.
|
Small Block Forming Machine: |
|
|
|
Fixed block molding machine
Description:
QTJ4-40Fixed block forming machine was called small brick or home-type brick. This machine is well performed, high efficiency, low energy consumption. It meet national standards (GBT8533-1988). It has achieved good economic and social benefits. It is an ideal block device to produce high quality products after its putting on the market.Features:
The machine is small footprint, light weight, low power consumption, less investment. So it is applicable to home useage. It is also suited to small-scale construction sites. (The blocks can be stacked 3-5 layers immediately after its forming)Specifications:
Molding Blocks: 4 block/plate
Molding cycle: 40 - 45 second
Block Size:
390 × 190 × 190 (mm)
390 × 115 × 190 (mm)
390 × 140 × 190 (mm)
390 × 90 × 190 (mm)
Days yield: 1800 - 2200
Total Power: 4.8kw
|
| |
|
|
 |
|
Introduction:
The conveyers which are produced by ZHENG ZHOU MINGXING MACHINERY MANUFACTURE.CO.LTD consist of standard parts, which are advanced and simple in structure, easy to maintain. They are widely used in mining, metallurgical and coal industry to transfer sandy or lump material, or packaged material. According to different transferring equipment, the transfer system can be one independently or multi-conveyers or combined with other transfer equipments. The belt conveyer can be installed horizontally or aslope to meet the needs of different transfer lines.
Tape Width
(mm) |
Conveyor Length(m) |
ConveyorSpeed
(m/s) |
Conveyor Capacity
(t/h) |
Power(kw) |
400 |
≤12 |
12-20 |
20-25 |
1.3-1.6 |
40-80 |
1.5 2.2-4 |
3.5-7.5 |
500 |
≤1220-30 20-30 |
1.3-1.6 |
78-191 |
3 4-5.5 |
5.5-7.5 |
650 |
≤1212-20 20-30 |
1.3-1.6 |
131-323 |
4 |
5.5 |
7.5-11 |
800 |
≤66-15 15-30 |
1.3-1.6 |
278-546 |
4 5.5 |
7.5-15 |
1000 |
≤1010-20 20-40 |
1.3-2.0 |
435-853 |
5.5 7.5-11 |
11-12 |
1200 |
≤10 10-20 20-40 |
1.3-2.0 |
655-1284 |
7.5 11 |
15-30 |
|
|
|
|
Description:
Automatic Batcher is used with the mixer supporting automatic batching. It can be designed according to the user of concrete with than the auto-complete sand, stone, cement and other ingredients 3-6 kinds of materials. This series of products equipped with electronic weighing. PC Control, digital display, wired remote control, with ingredients weighing accuracy, precision, high speed, remote control capability, easy to use and so on. This series concrete batching machine with the corresponding combination of concrete mixer can be composed of a variety of different Form, different specifications of the modular mixing station.
|
Automatic Palletizer |
|
 |
|
|
Description:
To achieve the automatic stacking blocks, improve production efficiency and save manpower. Is a large-scale brick-making machine ideal for supporting equipment, So that more effective to play a large brick of high output edge. A small investment. Can be a major step forward at the counterparts.
|
|
|
 |
|
Description:
JS series concrete mixer is double horizontal shaft forced mixer. Combining advantages of single unit stand-alone operation and simple concrete batching plant with PL series batching machine, the unit can work in concrete mixing station for prefabricated-component factories of various sizes and construction of highway, bridge, water conservation and harbor, etc. It can mix no-slump concrete, plastic concrete, liquefied concrete, lightweight aggregate concrete and various mortar , is a widely used high efficiency model.
The series products are reasonable in structure, novel in layout and convenient in operation and maintenance. The height of supporting legs is designed as 1.6m,2.2m, 2.7m,3.8m. Tipper car, self-dumping truck and mixer truck can be used by user. The product can be customized upon user' s requests.
|
|
Phone：0371-67195218
67195556 13503821638 |
|
|
|
|
|
Phone：0371-67195218
67195556 13503821638 |
|
|
|
|
|
|
| |
|
|
